What is the use of the
yield keyword in Python? What does it do?
For example, I’m trying to understand this code1:
def _get_child_candidates(self, distance, min_dist, max_dist): if self._leftchild and distance - max_dist < self._median: yield self._leftchild if self._rightchild and distance + max_dist >= self._median: yield self._rightchild
And this is the caller:
result, candidates = , [self] while candidates: node = candidates.pop() distance = node._get_dist(obj) if distance <= max_dist and distance >= min_dist: result.extend(node._values) candidates.extend(node._get_child_candidates(distance, min_dist, max_dist)) return result
What happens when the method
_get_child_candidates is called?
Is a list returned? A single element? Is it called again? When will subsequent calls stop?
1. This piece of code was written by Jochen Schulz (jrschulz), who made a great Python library for metric spaces. This is the link to the complete source: Module mspace.
Now we will see Solution for issue: What does the “yield” keyword do?
To understand what
yield does, you must understand what generators are. And before you can understand generators, you must understand iterables.
When you create a list, you can read its items one by one. Reading its items one by one is called iteration:
>>> mylist = [1, 2, 3] >>> for i in mylist: ... print(i) 1 2 3
mylist is an iterable. When you use a list comprehension, you create a list, and so an iterable:
>>> mylist = [x*x for x in range(3)] >>> for i in mylist: ... print(i) 0 1 4
Everything you can use “
for... in...” on is an iterable;
These iterables are handy because you can read them as much as you wish, but you store all the values in memory and this is not always what you want when you have a lot of values.
Generators are iterators, a kind of iterable you can only iterate over once. Generators do not store all the values in memory, they generate the values on the fly:
>>> mygenerator = (x*x for x in range(3)) >>> for i in mygenerator: ... print(i) 0 1 4
It is just the same except you used
() instead of
. BUT, you cannot perform
for i in mygenerator a second time since generators can only be used once: they calculate 0, then forget about it and calculate 1, and end calculating 4, one by one.
yield is a keyword that is used like
return, except the function will return a generator.
>>> def create_generator(): ... mylist = range(3) ... for i in mylist: ... yield i*i ... >>> mygenerator = create_generator() # create a generator >>> print(mygenerator) # mygenerator is an object! <generator object create_generator at 0xb7555c34> >>> for i in mygenerator: ... print(i) 0 1 4
Here it’s a useless example, but it’s handy when you know your function will return a huge set of values that you will only need to read once.
yield, you must understand that when you call the function, the code you have written in the function body does not run. The function only returns the generator object, this is a bit tricky.
Then, your code will continue from where it left off each time
for uses the generator.
Now the hard part:
The first time the
for calls the generator object created from your function, it will run the code in your function from the beginning until it hits
yield, then it’ll return the first value of the loop. Then, each subsequent call will run another iteration of the loop you have written in the function and return the next value. This will continue until the generator is considered empty, which happens when the function runs without hitting
yield. That can be because the loop has come to an end, or because you no longer satisfy an
Your code explained
# Here you create the method of the node object that will return the generator def _get_child_candidates(self, distance, min_dist, max_dist): # Here is the code that will be called each time you use the generator object: # If there is still a child of the node object on its left # AND if the distance is ok, return the next child if self._leftchild and distance - max_dist < self._median: yield self._leftchild # If there is still a child of the node object on its right # AND if the distance is ok, return the next child if self._rightchild and distance + max_dist >= self._median: yield self._rightchild # If the function arrives here, the generator will be considered empty # there is no more than two values: the left and the right children
# Create an empty list and a list with the current object reference result, candidates = list(), [self] # Loop on candidates (they contain only one element at the beginning) while candidates: # Get the last candidate and remove it from the list node = candidates.pop() # Get the distance between obj and the candidate distance = node._get_dist(obj) # If distance is ok, then you can fill the result if distance <= max_dist and distance >= min_dist: result.extend(node._values) # Add the children of the candidate in the candidate's list # so the loop will keep running until it will have looked # at all the children of the children of the children, etc. of the candidate candidates.extend(node._get_child_candidates(distance, min_dist, max_dist)) return result
This code contains several smart parts:
- The loop iterates on a list, but the list expands while the loop is being iterated. It’s a concise way to go through all these nested data even if it’s a bit dangerous since you can end up with an infinite loop. In this case,
candidates.extend(node._get_child_candidates(distance, min_dist, max_dist))exhaust all the values of the generator, but
whilekeeps creating new generator objects which will produce different values from the previous ones since it’s not applied on the same node.
extend()method is a list object method that expects an iterable and adds its values to the list.
Usually we pass a list to it:
>>> a = [1, 2] >>> b = [3, 4] >>> a.extend(b) >>> print(a) [1, 2, 3, 4]
But in your code, it gets a generator, which is good because:
- You don’t need to read the values twice.
- You may have a lot of children and you don’t want them all stored in memory.
And it works because Python does not care if the argument of a method is a list or not. Python expects iterables so it will work with strings, lists, tuples, and generators! This is called duck typing and is one of the reasons why Python is so cool. But this is another story, for another question…
You can stop here, or read a little bit to see an advanced use of a generator:
Controlling a generator exhaustion
>>> class Bank(): # Let's create a bank, building ATMs ... crisis = False ... def create_atm(self): ... while not self.crisis: ... yield "$100" >>> hsbc = Bank() # When everything's ok the ATM gives you as much as you want >>> corner_street_atm = hsbc.create_atm() >>> print(corner_street_atm.next()) $100 >>> print(corner_street_atm.next()) $100 >>> print([corner_street_atm.next() for cash in range(5)]) ['$100', '$100', '$100', '$100', '$100'] >>> hsbc.crisis = True # Crisis is coming, no more money! >>> print(corner_street_atm.next()) <type 'exceptions.StopIteration'> >>> wall_street_atm = hsbc.create_atm() # It's even true for new ATMs >>> print(wall_street_atm.next()) <type 'exceptions.StopIteration'> >>> hsbc.crisis = False # The trouble is, even post-crisis the ATM remains empty >>> print(corner_street_atm.next()) <type 'exceptions.StopIteration'> >>> brand_new_atm = hsbc.create_atm() # Build a new one to get back in business >>> for cash in brand_new_atm: ... print cash $100 $100 $100 $100 $100 $100 $100 $100 $100 ...
Note: For Python 3, use
It can be useful for various things like controlling access to a resource.
Itertools, your best friend
The itertools module contains special functions to manipulate iterables. Ever wish to duplicate a generator?
Chain two generators? Group values in a nested list with a one-liner?
Map / Zip without creating another list?
An example? Let’s see the possible orders of arrival for a four-horse race:
>>> horses = [1, 2, 3, 4] >>> races = itertools.permutations(horses) >>> print(races) <itertools.permutations object at 0xb754f1dc> >>> print(list(itertools.permutations(horses))) [(1, 2, 3, 4), (1, 2, 4, 3), (1, 3, 2, 4), (1, 3, 4, 2), (1, 4, 2, 3), (1, 4, 3, 2), (2, 1, 3, 4), (2, 1, 4, 3), (2, 3, 1, 4), (2, 3, 4, 1), (2, 4, 1, 3), (2, 4, 3, 1), (3, 1, 2, 4), (3, 1, 4, 2), (3, 2, 1, 4), (3, 2, 4, 1), (3, 4, 1, 2), (3, 4, 2, 1), (4, 1, 2, 3), (4, 1, 3, 2), (4, 2, 1, 3), (4, 2, 3, 1), (4, 3, 1, 2), (4, 3, 2, 1)]
Understanding the inner mechanisms of iteration
Iteration is a process implying iterables (implementing the
__iter__() method) and iterators (implementing the
Iterables are any objects you can get an iterator from. Iterators are objects that let you iterate on iterables.
There is more about it in this article about how
for loops work.
This question is answered By – e-satis
This answer is collected from stackoverflow and reviewed by FixPython community admins, is licensed under cc by-sa 2.5 , cc by-sa 3.0 and cc by-sa 4.0